• To execute a send operation
After selecting the data items to send, press
execute the send operation.
(TRAN)
F6
(YES).....Sends data.
F1
(NO).......Returns to data selection screen.
F6
Press
(YES) to send the data.
F1
(YES)
F1
• You can interrupt a data operation at any time by pressing
The following shows what the displays of the sending and receiving units look like after the data communication
operation is complete.
Sending Unit
Press
to return to the data communication main menu.
AC
• To send all backup data
This operation allows you to send all memory contents, including mode settings. While the send data type
selection menu is on the screen, press
(BACK)
F6
Press
(TRAN) to start the send operation.
F6
(TRAN)
F6
(TRAN). A message appears to confirm that you want to
F6
AC
(BACK), and the back up send menu shown below appears.
F6
— 13 —
F1
.
Receiving Unit
F6
F6