Raytheon Anschütz SYNAPSIS ECDIS Operator's Manual page 383

Configure Tender is used to add new tender, edit the values for TTC (Tender
Transmission Code), Name, Channel and Recording status.
Procedure: Configuration (Figure: 12--34)
Step 1 Select Tender Configuration... from the Integration menu or as an
Step 2 Add a new tender
Step 3 A selected tender may be Deleted, moved Up or Down in the List.
Step 4 Click on the Apply or OK button for closing the dialog.
Edition: January 2016
SYNAPSIS ECDIS
Operator Manual
alternatively via the tool bar key.
The dialog box appears.
TTC
TTC is the tender ID which is set in the corresponding tender unit.
A tender may be temporarily enabled or disabled by
checking/deselect the check box.
Name
Each tender may be assigned a name for display purposes.
Ch
The channel needs to be set to the corresponding coded channel
which is set in the corresponding Seetrac Tender unit.
Rec
Select when the tender shall be recorded using the Tender Recording
function.
Before changing the record status, Tender Recording has to be
disabled.
Any changes to the tender configuration or the tender options
become valid.
12--53
R
Raytheon Anschütz GmbH
Germany
4343DOC020102