Cisco MXP Series The Physical Interface Manual page 23

MXP Series Codecs
Contents
ISDN BRI sockets (not applicable to 3000 MXP Net)
TIP! Wherever applicable, the use of Category
5 cabling or better is strongly recommended!
For HD camera applications, however,
Category 7.5 is required.
D14790.01 MXP Series Codec Physical Interface Guide, May 2011.
© 2011 Cisco Systems, Inc. All rights reserved.
Introduction Codec 6000 MXP
S/T Interface
BRI Pin out
Pin 3 TX+
Pin 4 RX+
Pin 5 RX–
Pin 6 TX–
Codec 3000 MXP Codec 3000 MXP
RJ-45 Connector
ISDN BRI interface. ISDN I.420
pin-out
(RJ-45 Jack) Basic Rate Interface
1 8
S/T (2B + D), 128 kbps per ISDN
I/F. Use any standard BRI cable to
TOP
connect the Codec to BRI.
FRONT
1 8
23
Physical interface guide
Contact us
www.cisco.com