Advertisement
Installing the PIM
Installing the PIM on the Wall
1 . Separate the installation plate on the rear side of PIM .
2 . Fix the installation plate on the wall using 4 screws .
3 . Hang the PIM on the groove which is on the top of the installation plate .
4 . Open the bottom cover and fix the installation plate and PIM using 2 screws .
- Depending on the installation environment, open the top cover and fix PIM
using assistant holes . (Screws for assistant hole are not provided . )
5 . If you install PIM inside of the wall or wiring from the rear side is needed, use
wiring groove on the bottom of PIM .
• To prevent breakdown and damage of PIM and for safe usage, it is recommended to install PIM on the wall .
CAUTION
English-9
Installation
plate
Assistant hole
Wiring groove
Advertisement
