Advertisement
Setting the Initial Value
f You can set the initial value for each channel .
f
1 . Access to main menu by pressing the [Menu] button from the normal display . Then select '2 . C onfiguration' by pressing
the [], [] buttons, and press the [Set] button .
Main Menu
2.Configuration
2 . Enter the password the [], [] buttons and then press the [Set] button .
- The default password is '0000' .
3 . Select '2 . 6 Value Set' by pressing the [], [] buttons and then press the [Set] button .
2.Configuration
2.6 Value Set
4 . Move to the channel you want to set by pressing the [], [] buttons, and then press the [Set] button .
- You can select each channel or all channel altogether .
5 . Modify the digit by pressing the [], [] buttons . You can move to next digit by pressing the [Set] button .
- You can modify the initial value of the channel you wish to change .
- If you modify the setting, saved value will be reset and the device will re-calculate the value according to the modified
value .
- To set the initial value for all channels, select 'ALL Channel' in step 4 .
Set Ch1 kWh
CH1:00000.0kWh
6 . Press the [Set] button to save the setting .
7 . After the setting, press the [Menu] button to move to upper menu or cancel the setting .
- All menus will return to the normal display if there is no input for 1 minute .
Enter your P/W
0:0:0:0
2.6 Value Set
CH1:00000.0kWh
Save Settings
CH1:00000.0kWh
English-27
Advertisement
