Tascam HS-4000 Release Notes page 9

• FADER STOP MODE
•
The WAV bext chunk size was 2 bytes larger than the
standard size. This has been fixed.
•
During recording, when the
page item was set to
TC GEN MODE
removing the CF card that was not set as the current
one would cause the TC generator to stop. This has
been fixed.
•
In take mode, if you changed the operation mode
when stopped after adding a mark, the mark would not
be added to the audio file. This has been fixed.
•
In timeline mode, if you added a mark, a mark would
also be added to the audio file. This has been fixed.
•
In dual playlist mode, if you changed to take mode
after adding an entry to player B, the mark list would
stop being shown. This has been fixed.
•
When using BWF/WAV files that had been edited
by something other than this unit, if you edited
mark information using this unit, marks would stop
appearing on the
MARK LIST
fixed.
•
In dual playlist mode, if you assigned the same take to
the same entry in both players A and B, marks would
stop being shown in the
been fixed.
•
Operation stability has improved.
HS-4000
screen
SYNC T/C SETUP
mode,
REC RUN
screen. This has been
screen. This has
MARK LIST
Release Notes
TASCAM HS-4000
9