V1.60 Fixes; V1.53 Fixes; V1.52 Fixes - Tascam HS-4000 Release Notes

•
When switching to on air operation mode, monitor
and headphones output might be interrupted. This has
been fixed.
•
In A/B MIXED playlist mode, if you selected multiple
entries on the entry list screen and then pressed the

V1.60 fixes

•
When loading a Project that the Session/Take Copy
function had been used with, project settings might
not be regenerated correctly. This has been fixed.
•
In playlist mode, after importing a PPL file, the pop-up
message might not disappear. This has been fixed.

V1.53 fixes

•
In playlist mode, if an entry added before the current
entry was deleted or added again, the file might not
playback. This has been fixed.
•
When the time display mode was T/C, if an entry had its
changed in playlist mode, this change
Start Point
might not be reflected by the time counter, which
would show the unchanged start point. This has been
fixed.

V1.52 fixes

•
The firmware has been changed so that the
setting on the
J Tally
screen for on-air mode now maintains its
MOTE SETUP
backup setting separately from other operation modes.
•
The firmware has been fixed so that when the
item on the
low BWF-J
screen is set to ON, if a take/entry is skipped to
SETUP
that has a BC$STANDBY mark set at its beginning, the
unit pauses and a BC$STANDBY tally is output.
•
The firmware has been fixed so that when
BC$STANDBY/BC$PAUSE tally output is ON, if a take/
entry is skipped, tally output is turned OFF.
•
The firmware has been fixed so that when in on-
air mode, the button is ON and playback is
ON AIR
paused at a BC$STANDBY position, if the
button is turned OFF and playback is paused at a
position other than BC$STANDBY, the BC$STANDBY
tally output is turned OFF.
•
In on-air mode, when the
playback was paused anywhere other than the first
take, if the button was turned ON, playback
ON AIR
would not be paused at the correct position in some
cases. This has been fixed.
•
When was set to
AUX Assign
the page of the
PARALLEL
if player B was fader started, other parallel controller
button operations would not be received. This has
been fixed.
HS-4000
BWF-
page of the
PARALLEL RE-
Fol-
page of the
GENERAL PLAY
ON AIR
button was OFF and
ON AIR
on
Fader Start B
screen,
REMOTE SETUP
Release Notes
button in the pull-up menu, the entries added
CLEAR
for Player B might not be removed correctly. This has
been fixed.
•
Operation stability has been improved.
•
If a new playlist was created in A/B MIXED mode, a
pop-up message asking whether to load to player A or
B would not appear and the playlist would always be
loaded to player A. This has been fixed.
•
Operation stability has been improved.
•
For the 256th and later takes, skipping between marks,
as well as setting, showing and changing marks was
not possible. This has been fixed.
•
In playlist mode, the
CALL [CHASE]
no effect when the
ADJUST ENTRY
•
In playlist mode, during
CAPTURE BC$
transport operations might have been responded to,
preventing correct playback afterward. This is been
fixed.
•
Operation stability has been improved.
•
If the parallel controller REC button was pressed twice
while the PLAY button was being pressed and held,
recording would start. This has been fixed.
•
In playlist mode, if an entry was assigned to a playlist
when the unit was not stopped, operation would
become impossible in some cases. This has been fixed.
•
If a USB keyboard was connected or disconnected
when the unit's power was ON, operation would
become impossible in some cases. This has been fixed.
•
WAV and BWF files marked as read-only could not be
played back. This has been fixed.
•
The firmware has been changed so that if you try to
add or edit a mark in a WAV or BWF file that is marked
as read-only, a message now appears explaining that
this is not possible.
•
On the page of the
SETUP
setting was set to
FrameType
with a frame type of 29.97NDF was input, the input
frame type was shown as
show .
29.97NDF
•
Operation stability has been improved.
button now has
screen is open.
execution,
screen, when the
SYNC/TC
, if timecode
23.976F
. This has been fixed to
30NDF
5
TASCAM HS-4000