Neuronode Controller Settings - Control Bionics NeuroNode 3 User Manual

PAGE 19 | ACCESSORIES

NeuroNode Controller Settings

The Main Menu is accessed by selecting the Main Menu Icon from the Graph
Menu.
Graph:
View Graph.
Disconnect:
Touch this button when
the battery needs charged
or when the NeuroNode
will be out of use for more
than 60 minutes. For
shorter breaks in a
session, consider using
the Pause/Play button on
the Graph Menu.
About NeuroNode:
Touch here to display
identifying information
about this NeuroNode
System, including the
serial number of the
NeuroNode , the software
version of the Application,
and the firmware version
of the NeuroNode itself.
Advanced:
Access the advanced
settings in order to switch
from EMG to 3D Spatial
signaling. Additionally, this
is where information is
kept to help Control
Bionics personnel provide
support.
Standby:
Touch this to turn off the
NeuroNode Bluetooth
radio and put the
NeuroNode into
low-power mode.