Table of Contents
Advertisement
A: Serial Control for the CUV-TLC-50F
Command
[F1 IS ?]
[F1 IS 0+-S]
[F1 IS +5]
[F1 IS +]
[F1 IS -]
[F1 CT ?]
[F1 CT 22.8]
[F1 ER +]
[F1 ER -]
[F1 RS S XX]
[F1 RT S XX]
When the Controller is restarted (by being powered off and back on again), it automatically sends the
message [F1 IS R] to notify the program of the restart.
20
Table 1: Serial Commands (Cont'd)
Response
Query: What is the current instrument status?
Reply: no unreported error (0 or 1)
temperature control is on (+ or -)
temperature is stable (S or C)
stirrer is off (+ or -)
Automatically report instrument status every 5 seconds
Automatically report instrument status whenever it changes (e.g., due
to manual changes at controller)
Stop, periodic or automatic reports of instrument status
Query: report the current temperature
Reply: the current temperature is 22.8° C
Automatically report errors when they occur
Stop automatic error reports
Ramping Commands
Set Ramping Seconds, the time increment of the ramp rate (positive
integer in seconds)
Set Ramping Temperature, the temperature increment of the ramp
rate (positive integer in hundredths of a °C)
000-30000-000-02-0205
Advertisement
Table of Contents
