Installation; Removing The Cover - nurse roller Instructions Manual

GB

INSTALLATION

5
Step 1. Push the child seat facing rearward firmly against the backrest of the cars seat.
Step2.Route the lap section of the adult safety belt through the lap belt blue guide sat the front
of the child seat and fasten the car seatbelt.
Step3.Place the diagonal belt in the diagonal seat belt guide at the back of the seat.
Step4.Take out all the stack in the seat belt, ensuring that there are not wist sorkinks in the seat-
belt.
CARE OFYOUR CHILD SEAT
6

REMOVING THE COVER

Dismantle the Y-belt .
Unfasten the buckle and pass the bottom of it through the cover.
Pass the top right and left parts of the buckle through the openings of the cover.
Hand wash fabric parts with a sponge and soapy water.
MAINTENANCE
• Keep the metal parts clean and dry to prevent rusting. Grease the mobile parts and mecha-
nisms regularly with a silicone based spray. Do not use oil or grease. To clean the plastic parts
just use mild detergent and warm water. Do not expose the upholstery to sunlight for long
periods of time. The upholstery may be taken off for washing.
IM 1944,01 ROLLER+CARSEAT ins.indd 49
INSTRUCTIONS
49
11/4/17 12:36