Advertisement
Available languages
Available languages
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film from the sauce drip tray and install it under the cylin-
ders.
b) First starting:
Before the first use, clean the heating cylinders with water and some dish-
washing liquid. The use of detergent is possible as long as it is not excessively
aggressive. Then wipe with a cloth dipped in oil.
Be sure to use only sausages designed for this type of use so that they main-
tain their attractive look during heating.
However, because sausages are never uniform, the parts in contact with the
rollers tend to brown faster than the remainder of the sausage.
First cleaning
Clean the device before the first use. (See. 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Power control knob (n°2
on picture)
Orange pilot light
(n°1 on picture)
On/off switch
(n°3on picture)
Putting on
Press the switch on/off (n°3 on picture)
Turn on the power control knob (n°2 on picture) on the wished position: the or-
ange pilot light (n°1 on picture) ignites.
Function
Temperature setting
Machine is heating (pilot light on)
Temperature reached (pilot light off)
On/off
16
Advertisement
