Advertisement
Instruction battery change
for LEUCHTIE
Charge / Pro Easy Charge
Please make sure that you have the correct batteries for your LEUCHTIE.
Mixing them up will result in malfunction and greatly reduced battery life.
LEUCHTIE model
LEUCHTIE Plus Easy Charge
LEUCHTIE Premium Easy Charge
LEUCHTIE Pro Easy Charge
Removing the batteries
Detach the tube from the battery pack on both sides with slight kinking movements.
1. Pull both silicone sleeves off the battery pack.
2. Bend the battery contacts carefully using a pointed object (e.g. a small screwdriver or toothpick) until the
batteries are exposed.
3. Tap both sides of the battery pack one after the other on a table or against your hand until both batteries
fall out.
®
Plus Easy Charge / Premium Easy
Size label
white
black
white, designation Pro
Battery type
Nickel zinc batteries (NiZN) 1,6 V
Nickel metal hydride batteries (NiMH) 1,2 V
Nickel metal hydride batteries (NiMH) 1,2 V
Advertisement
Table of Contents
Related Manuals for Leuchtie Plus Easy Charge
Summary of Contents for Leuchtie Plus Easy Charge
- Page 1 LEUCHTIE Plus Easy Charge / Premium Easy Charge / Pro Easy Charge Please make sure that you have the correct batteries for your LEUCHTIE. Mixing them up will result in malfunction and greatly reduced battery life. LEUCHTIE model Size label...
- Page 2 Inserting new batteries 4. The charging contacts (A) of the battery pack point upwards, the label on the tube (B) is on the right side. There are blue markings in both the sockets of the tube and in the contact plates of the battery section.
- Page 3 IMPORTANT: There must be no gap between the battery pack and the tube: Your LEUCHTIE should now switch on as soon as the battery pack is pointing downwards. If not, please check again that the tube and battery pack have been plugged together as shown on page 1 and whether the contact springs are possibly bent.
Need help?
Do you have a question about the Plus Easy Charge and is the answer not in the manual?
Questions and answers