Fluke i410 Instructions Manual page 2

• Do not use a current measurement as an indication that a circuit is
safe to touch. A voltage measurement is necessary to know if a circuit
is hazardous.
• Limit operation to the specified measurement category, voltage, or
amperage ratings.
• The battery door must be closed and locked before you operate the
Product.
• Remove all probes, test leads, and accessories before the battery door
is opened.
• Hold the Product behind the tactile barrier.
• Remove the input signals before you clean the Product.
• Repair the Product before use if the battery leaks. Battery leakage may
create a shock hazard or damage the Product.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
• Remove the batteries if the Product is not used for an extended period
of time, or if stored in temperatures above 50 °C. If the batteries are not
removed, battery leakage may result.
• Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.
• Do not put battery cells and battery packs near heat or fire. Do not put
in sunlight.
Symbols
Symbol
X
W



T

,
P
)


~
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
WARNING. RISK OF DANGER.
Consult user documentation.
AC (Alternating Current)
DC (Direct Current)
Double Insulated
Earth
Application around and removal from uninsulated hazardous live
conductors is permitted.
Conforms to European Union directives.
Certified by CSA Group to North American safety standards.
Conforms to relevant Australian Safety and EMC standards.
Measurement Category III is applicable to test and measuring
circuits connected to the distribution part of the building's low-
voltage MAINS installation.
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not discard
this electrical/electronic product in domestic household waste.
Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose
of this product as unsorted municipal waste.
Description