Min Max Recording; Basic Maintenance; General Maintenance - Fluke 87V MAX Calibration

87V MAX
Calibration Information

MIN MAX Recording

Nominal Response
100 ms to 80 %
(dc functions)
120 ms to 80 %
(ac functions)
250 μs (peak)
[1] For repetitive peaks: 1 ms for single events.

Basic Maintenance

To prevent possible electrical shock, fire, or personal injury:
•
•
•
•

General Maintenance

Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
Dirt or moisture in the terminals can affect readings and can falsely activate the
Input Alert feature. Clean the terminals as follows:
1. Turn the Meter off and remove all test leads.
2. Shake out any dirt that may be in the terminals.
3. Soak a clean swab with mild detergent and water. Work the swab around in
6
Specified accuracy ±12 counts for changes >200 ms in duration
Specified accuracy ±40 counts for changes >350 ms and inputs >25 % of range
Specified accuracy ±100 counts for changes >250 μs in duration
[1]
(add ±100 counts for readings over 6000 counts)
(add ±100 counts for readings in Low Pass mode)
Remove the input signals before you clean the Product.
Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
Use only specified replacement parts.
Have an approved technician repair the Product.
each terminal. Dry each terminal using canned air to force the water and
detergent out of the terminals.
Accuracy
XWWarning