Iso Sensitivity Value Setup - Polaris Karat Flash Meter Instruction Manual

（＊Factory default settings）
2-5

ISO Sensitivity Value Setup

○ Hold down the ISO Button❽ and press the Cross Key⓬ (UP △ / DOWN ▽) to select the desired
ISO Sensitivity Value.
○ The UP (△) Key is used to select a higher value, and the DOWN (▽) Key a lower value.
○ Holding down the UP (△) Key or DOWN (▽) Key for more than one second continuously increase
or decrease the value.
○ ISO Sensitivity Value can be changed after taking a measurement. Newly caluculated values are
displayed when the ISO is changed.
○ The procedure for setting values is the same in any mode.
○ When the power is turned off, or the batteries changed, the last settings are stored in the memory.
ASPEN CORPORATION
Auto Power Off... To preserve battery life, the power is automatically turned off when
the meter is left inactive for a predetermined length of time.
Setting time：300s・120s・90s・60s
Auto Screen Off... To preserve battery life, the display is automatically turned off when
the meter is left inactive for a predetermined length of time.
Setting time：120s・90s・60s・30s
＊When the screen has turned off, reactivate it by pressing any
button. This will bring back the last screen.
Screen Brightness... Set the brightness of the display.
Brightness range from －5 to ＋5 (by 1 step)
Flash Waiting Time... Set how long the meter will wait to take a Flash measurement
without synch cord.
Setting time：120s・60s・30s
Program Level... Can be set to modify readings in the range from －0.9 to ＋0.9 stops.
Return to MENU... Return to MENU display
6