Figure 7-24
32. Bring down the top curtain, carefully working the opening around the fan vent as shown in Figure 7-25.
33. Locate the front curtain and hang it from the front track with hooks as shown in Figure 7-26 below. Once
the front curtain is installed, pull down the curtain with "Magnaflux" on it to block white light from entering
the inspection booth. This "Magnaflux" curtain is shown in Figure 7-27 below.
34. The front curtain can be folded in half for extra ventilation. Fold in half and mount the lower eyelets on
the same hook already supporting the curtain. Verify white light levels inside the inspection booth are
still acceptable if this is done.
Figure 7-26
Figure 7-25
Figure 7-27
Revised March 2020
www.magnaflux.com
Page 7-7