Mode Description - Dimplex DCTF81R Instruction Manual

Operation
Note: All functions of the unit can be operated by the control panel or remote
control.
1. Place the fan on a flat stable surface and plug into a power outlet.
2. Press the SPEED/ON button to turn the unit ON and select the desired speed
setting.
3. There are 3 SPEED settings – 1 (Low), 2 (Medium) and 3 (High).
4. Press the TIMER button the set the auto-off timer in 0.5 hour increments, up to a
maximum of 7.5 hours.
5. Press the MODE button to seclect either Normal, Natural, or Sleep modes. Note:
The MODE LED indicator light changes color depending on the MODE selected.
Red = Normal mode, Green = Natural mode & Yellow = Sleep mode.
6. Press the OSC button to start/stop the left to right oscillation function.
7. Press the OFF button to turn the unit off.

Mode Description

Normal: When this mode is selected, the fan will operate as normal, in the settings
selected (red indicator light).
Natural: This mode cycles through Low, Medium, High for 5 seconds each (green
indicator light).
Sleep: The sleep mode varies depending on what speed the fan is working in at the
time of selection (yellow indicator light). Refer to the below examples:
Low Speed - the fan will work at this speed without change until it is
turned off (either manually or by the timer).
Medium speed - the fan will work at medium speed for 30 minutes, then
switch to low speed until it is turned off.
High Speed - the fan will work at high speed for 30 minutes, then switch
to medium speed for 30 minutes, and finally work in low speed before
it is turned off.
10