Table of Contents
Advertisement
Operation Tips
For typical installations, use the provided #66 orifice. A #60 or #72 orifice can be used with the ILP for specific
installations. See the troubleshooting section for more details.
It is recommended that an Inline Gas Filter be used with the ILP to prevent the orifice from clogging due to any
gas impurities.
The best operating pressure range is 3-5 psi. The optimal operating pressure can vary with orifice size and gas
quality.
Test the Hardware (Optional)
It is recommended that you test electrical connections and the system before mounting the ILP.
Gasless Test
1. After grounding the ILP, use the BMS system to start the ignition sequence.
2. Press the Ignite button to initiate sparking.
3. Listen or carefully look for a spark inside the nozzle.
WARNING: Do not connect the ILP to the gas line for this test. Gas MUST be off. Make sure that the ILP is
grounded properly.
PROFIRE
1.855.776.3473
solutions@profireenergy.com
PROFIRE Inline Pilot Manual & Install Guide
Rev 1.0
Page 6 of 9
Advertisement
Table of Contents
