Table of Contents
Advertisement
System Diagram
2. Installation
The following steps provide instructions to complete the installation process. Please read the entire section and
follow the instructions carefully.
Important Safety Information
Fire or Explosion Hazard. Failure to properly ground the ILP back to the Burner Management System's Ion terminal
may result in accidental electrocution, product damage, or failure to ignite the pilot.
Check the maximum temperature for your installation and use suitable wiring for that application.
Connect the System
Connect the appropriate wires to the BMS terminals as described. Connect the gas line adapter fitting and gas line
to the source.
Please note: The Inline Pilot MUST be grounded to a suitable ground via the included grounding screw (green
screw) located on the rear of the Inline Pilot base hub.
PROFIRE
1.855.776.3473
solutions@profireenergy.com
PROFIRE Inline Pilot Manual & Install Guide
Rev 1.0
Page 4 of 9
Advertisement
Table of Contents
