Summary of Contents for ProFire Inline Pilot
- Page 1 PROFIRE Inline Pilot Manual & Install Guide March 2019 Rev. 1.0 PROFIRE Inline Pilot Manual & Install Guide PROFIRE 1.855.776.3473 solutions@profireenergy.com Page 1 of 9...
-
Page 2: Table Of Contents
PROFIRE Inline Pilot Manual & Install Guide Rev 1.0 Product Information ..............................3 Features ..................................3 Specifications ................................3 System Diagram................................4 Installation ................................... 4 Important Safety Information ............................. 4 Connect the System ..............................4 Test the Hardware (Optional) ............................. 6 Install the System ................................ -
Page 3: Product Information
1. Product Information The Inline Pilot (ILP) is a unique pilot design that uses a single internal, inline ignitor and flame detection rod fitted into a specially designed combustion nozzle. The nozzle consists of an optimized internal diffuser and welded shell assembly. -
Page 4: System Diagram
Connect the appropriate wires to the BMS terminals as described. Connect the gas line adapter fitting and gas line to the source. Please note: The Inline Pilot MUST be grounded to a suitable ground via the included grounding screw (green screw) located on the rear of the Inline Pilot base hub. - Page 5 PROFIRE Inline Pilot Manual & Install Guide Rev 1.0 PROFIRE 1.855.776.3473 solutions@profireenergy.com Page 5 of 9...
-
Page 6: Test The Hardware (Optional)
PROFIRE Inline Pilot Manual & Install Guide Rev 1.0 Operation Tips For typical installations, use the provided #66 orifice. A #60 or #72 orifice can be used with the ILP for specific installations. See the troubleshooting section for more details. -
Page 7: Install The System
PROFIRE Inline Pilot Manual & Install Guide Rev 1.0 Gas Test 1. Connect the ILP to the gas line. 2. Press the Ignite button to initiate sparking. 3. The ILP will spark and ignite the gas flowing up to the nozzle. -
Page 8: Installation Tips
PROFIRE Inline Pilot Manual & Install Guide Rev 1.0 Installation Tips Horizontal Applications Install the ILP parallel to the primary burner and align the etch line on the pilot nozzle with the first point of gas contact on the main burner nozzle. (See diagram above for details). -
Page 9: Profire Contact Information
It is not necessary to operate at pressures above 6 psi with this pilot as it will still function below the normal operating range, even in adverse conditions. 5. PROFIRE Contact Information If you have any concerns or questions, please contact PROFIRE as follows: U.S. 1.801.796.5127...