Troubleshooting - Wisco Industries 695D Manual

Food warming/ merchandising cabinet
Hide thumbs Also See for 695D:
Table of Contents

Advertisement

TROUBLESHOOTING

:
Unplug unit from power source, and allow to cool completely before performing any maintenance
or cleaning.
Unit not working:
• Check the power switch position, power cord, and/or electrical circuit.
Display light not working:
• Tighten or replace the bulb.
Loud noise coming from the unit:
• Check to see that blower motor is functioning properly
Unit not heating properly:
• Has food been prepared in advance and placed in warmer at proper serving temperature?
• Check heat settings. Is it at correct setting for your food product?
• Turn unit on, open the door, and verify that hot air is being blown into unit. If not, your blower
motor may not be functioning properly.
• If the air being blown in is not hot, then the thermostat may not be functioning properly.
• If carousel is not turning: Drive motor may not be functioning or door switch may not be func-
tioning properly
NOTES:
P.O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.7399 • wiscoind.com • wiscomade.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

695d-s

Table of Contents