Related Manuals for Wisco Industries 695D Series
Summary of Contents for Wisco Industries 695D Series
- Page 1 Models 695D/925 Series- Blower Motor Replacement 0022309 *For instructional purposes, model 695D is shown in photos. However, instructions for the 925 series are the same.* FS140138 REV: ORIG Page 1 of 4 7-31-2020...
- Page 2 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove side panel by pushing the graphic panel in gently Remove (8) screws and remove the top. to separate the latches. Then pull the panel up and out. FS140138 REV: ORIG Page 2 of 4 7-31-2020...
- Page 3 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove (4) screws on top of the Disconect motor wires (marked Remove (1) screw holding the Air Lid Assembly and remove the by yellow arrows below) blower motor bracket in place assembly. and remove the blower motor assembly.
- Page 4 Models 695D/925 Series- Blower Motor Replacement 0022309 Remove (8) Screws from the motor’s bracket and disassemble the bracket. Using the new motor, complete all steps in reverse order and you have successfully replaced your units blower motor. Your unit is now ready for operation. FS140138 REV: ORIG Page 4 of 4 7-31-2020...