Reversible Door - Wisco Industries 695D Manual

REVERSIBLE DOOR:

REVERSIBLE DOOR:
The Access Door is designed for easy conversion to open right or left. Survey the selected operating
area to determine if conversion is necessary.
The Access Door is designed for easy conversion to open right or left. Survey the selected operating area to
determine if conversion is necessary.
To Convert Door:
T C O ONVERT OOR: D
1. TURN IT OFF: DO NOT tip unit on its back or sides. Water will escape from the reservoir causing
electrical short or possible shock.
1. T URN U NIT O
electrical short or possible shock.
2. REMOVE DOOR: Slide the front of the Food Warmer toward the edge of the counter or table top
2. R EMOVE OOR D
until the lower Hinge Pin is accessible by screwdriver. While supporting the door, remove upper
lower Hinge Pin is accessible by screwdriver. While supporting the door, remove upper and lower Hinge Pins
and lower Hinge Pins and Nylon Spacers.
and Nylon Spacers.
3. REVERSE HINGES: Using a 3/32" Allen Wrench, remove the (4) Button Screws located on the
3. R EVERSE INGES H
right and left columns. Move the Hinges to the opposite column, and reassemble.
columns. Move the Hinges to the opposite column, and reassemble.
4. REPLACE DOOR: Rotate the door 180 degrees, insert Spacers and Hinge Pins. NOTE: The Nylon
4. R EPLACE OOR D
Spacers must be reinserted between the door and hinges.
must be reinserted between the door and hinges.
P.O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.7399 • wiscoind.com • wiscomade.com
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
FF : DO NOT tip unit on its back or sides. Water will escape from the reservoir causing
: Slide the front of the Food Warmer toward the edge of the counter or table top until the
: Using a 3/32" Allen Wrench, remove the (4) Button Screws located on the right and left
: Rotate the door 180 degrees, insert Spacers and Hinge Pins. NOTE: The Nylon Spacers
Hinge
Hinge Pin
Button Screws
Nylon Spacer