Location Of Appliance - Zanussi ZDG 58 Operating Instructions Manual

LOCATION OF APPLIANCE

The appliance may be located in a kitchen, a kitchen/diner or bedsitting room, but not located in a bathroom or
shower room.
It is essential that there is a minimum clearance of 3mm between the top surface of the appliance and
the inside top of the cabinet. The unit must be fitted into a cabinet conforming to Fig. 1. The following
internal dimensions are particularly important.
Height
Width
Solid Pipe Depth
Flexible Pipe Depth
NOTE: Where a cupboard door with a handle is situated above the appliance, we recommend a minimum
clearance gap of 5mm between fascia top trim and door.
Fig.1
4
874..............Minimum
560..............Minimum
560..............Minimum
575..............Minimum
879.............. .Maximum
570............... Maximum
N/A................Maximum
N/A................Maximum