Teach-Out/Restore Factory Settings; Operating Modes (Auto/Manu/Holiday); Comfort And Eco Temperature - eQ-3 HomeMatic HM-TC-IT-WM-W-EU Installation And Operating Manual

Teach-out/Restore factory settings

inbox. Here, you must configure the device and its associ-
ated channels in order to make them available for operat-
ing and configuration tasks. Give the device a name and
assign it to a room. You can also make individual param-
eter settings.
Now you can use the „WebUI" user interface to control
your device, configure it, connect it directly to other devic-
es, or use it in central control unit programs. Please refer
to the „WebUI" manual for more details (you can find this in
the „Downloads" area of the website www.homematic.com).
10 Teach-out/Restore factory set-
tings
The factory settings of the room thermostat can be re-
stored manually. Restoring the factory settings deletes all
settings and information about taught-in devices.
• First remove the batteries from the battery compartment.
• Press the three buttons (
teries at the same time. Once "rES" is displayed, you
can release the buttons and the factory settings will be
restored.
Alternatively, you can restore the factory settings via
the configuration menu (see sec. „14.9 Restore
factory settings (rES)" on p. 77).
62
) and re-insert the bat-
11 Operating modes (auto/manu/ho-
liday)
By pressing the auto/manu button ( ) shortly you can
switch between the following operating modes:
• Auto: Week programme - automatic temperature regu-
lation in accordance with the time profile saved (heat/
reduce).
• Manu: Manual operation - the temperature set manually
using the handwheel is maintained permanently.
• Holiday ( ): In holiday mode, the set temperature is
maintained up to an end time, at which point the device
switches to auto mode automatically.

12 Comfort and eco temperature

The comfort and eco temperature button (
switching between comfort and eco temperature simple
and user friendly. The factory setting for the comfort tem-
perature is 21.0 °C and the eco temperature 17.0 °C. The
comfort and eco temperature can be changed individually.
If the room thermostat is used in connection with a
HomeMatic Central Control Unit, settings can also
be made via the user interface WebUI.
• Press down the comfort/eco button (
onds (> 3s).
• The display shows the symbol ( ) and the comfort tem-
perature as defined.
• Change the temperature with the handwheel and con-

Operating modes (auto/manu/holiday)

) makes
) for a few sec-
63