6.7 1070
System Board and Keyboard Control Card
Optional Communication Adapter, if installed (1020)
Bottom Cover (1010)
Memory Module Kit, if installed (1030)
Voltage Converter (1040)
Hard Disk Drive (1050).
Notes:
1.
When a new system board is installed, be sure to set the time and
date, and restore the system configuration data.
2.
When you replace the keyboard control card or install a new one, make
sure that the switch setting on the card is suitable for the type of
keyboard (see "Keyboard Control Card" in topic 7.6).
PICTURE 14
PICTURE 15
Note:
To disconnect the flexible cables 4, release the locking plate with
your finger nails and disconnect the flexible cable from the
connector.
IBM PS/2 Model N51 SX HMR
1070 System Board and Keyboard Control Card
PICTURE 16
¦ Copyright IBM Corp. 1991
6.7 - 1