Activating The Controller; Connecting Systems For Login - SKILLQUBE qubeCONTROLLER User Manual

ACTIVATING THE CONTROLLER

In the latest version, qubeSERIE users can decide on which iPads the controller is to
be activated. After the initial installation, you will be prompted to log into the cloud. After
a successful login, the controller is activated and can be used. If the hardware is
renewed or is to be replaced
due to a defect, the controller
can be deactivated and
reactivated on a new device.
Only selected persons of an
organisation can log in or out.
Further information is provided
in the qubeCLOUD manual.
CONNECTING SYSTEMS
FOR LOGIN
When connecting the
controller and the monitor,
please ensure that the systems
are located in one network to
guarantee a stable connection.
(Interfering frequencies in the
direct surroundings may impair
the connection and even cause
a loss of connection in the
worst case)