LG LV-B18 C Series Owner's Manual page 13

FORCED OPERATION
FORCED OPERATION
Operation procedures when the remote control
can't be used.
Press the Forced Operation button.
If you want to stop operation, press again.
When started, the operation conditions are
automatically set as follows:
During Forced Operation, the initial mode
continues.
Cooling Model
Operating mode Cooling
Indoor FAN Speed High
Setting Temperature 22°C
AUTO RESTART
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating conditions.
In case the air conditioner does not receive any signal from the remote control, it will turn off
automatically after 7 hours.
When the front grille is opened:
Once the front grille is opened for cleaning of the air filters or other reasons, the unit automatically
stops operation for safety: In some 60 Hz models (for cooling only), all memorized functions such as
operation mode, room temperature setting, operation start & stop by timer setting, etc. shall be
erased.
To restart the unit, close the front grille and press the Start/Stop button on the remote controller. If
necessary, please reset the reservation functions like operation start & stop and room temperature
setting.
Room Temp. ≥ 24°C
Cooling
High
22°C
13
Heat pump Model
21°C ≤ Room Temp. < 24°C
Soft Dry
Soft Dry Rule
Air Intake Temperature
Room Temp. < 21°C
Heating
High
24°C