Heating Operation(Heat pump model only)
Press the Start/Stop button.
1
The unit will respond with a beep.
To select Heating operation, press the Operation Mode
2
Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
Set the temperature higher than the room temperature.
3
The temperature can be set within a range of 16°C~30°C in
1°C increments.
You can select the fan speed in four steps–low, medium, high,
4
or CHAOS. Each time the button is pressed, the fan speed
mode is shifted.
10
Auto
Soft Dry
(Heat pump model only)
To raise the temperature
To lower the temperature
Heating