Table of Contents
Advertisement
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
x1
To set the clock, see below.
SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button
down for 3 seconds.
2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once
more after Step 1, in the example below
To set the clock, follow the example below.
Example:
To set the 24 hour clock to 23:35.
1. Choose the clock function.
(12 hour clock)
x1 and hold for
3 secs.
4. Set the minutes.
Rotate the TIMER/WEIGHT
knob until the correct minute is
displayed (35).
NOTE:
1. You can rotate the TIMER/WEIGHT knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
will appear in the display.
will appear in the display.
2. Set the hours.
Choose the 24 hour
clock.
x1
5. Press the MICROWAVE POWER
LEVEL button to start the clock.
6
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
Rotate the TIMER/WEIGHT
knob until the correct hour is
displayed (23).
Check the display.
x1
show
after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
x1 and hold
for 3 secs.
3. Press the MICROWAVE
POWER LEVEL button
to change from hours to
minutes.
x1
Advertisement
Table of Contents
