Download
Share
Print this page
Milnor 76028 G3 CBW Installation And Service
  1. Manuals
  2. Brands
  3. Milnor Manuals
  4. Washer
  5. 76028 G3 CBW
  6. Installation and service
Milnor 76028 G3 CBW Installation And Service

Milnor 76028 G3 CBW Installation And Service

Continuous batch washers
Hide thumbs Also See for 76028 G3 CBW:

Advertisement

Quick Links

Download this manual
Published Manual Number/ECN: MPI39G3TBE/2019416A
• Publishing System: TPAS2
• Access date: 03/25/2020
• Document ECNs: NOT latest
Installation and Service
76028 & 76039 G3 CBW®
Continuous Batch Washers
PELLERIN MILNOR CORPORATION
POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 76028 G3 CBW and is the answer not in the manual?

Questions and answers

Related Manuals for Milnor 76028 G3 CBW

Summary of Contents for Milnor 76028 G3 CBW

  • Page 1 Published Manual Number/ECN: MPI39G3TBE/2019416A • Publishing System: TPAS2 • Access date: 03/25/2020 • Document ECNs: NOT latest Installation and Service 76028 & 76039 G3 CBW® Continuous Batch Washers PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.
  • Page 3 Table of Contents MPI39G3TBE/19416A Page Description Document Limited Standard Warranty BMP720097/2019036 How to Get the Necessary Repair Components BIUUUD19/20081231 Trademarks BNUUUU02/2017285A 1. Safety and Maintenance Safety—Continuous Batch Washer BIUUUS27PC/20051111 Safety Placard Use and Placement 76028,76039G3 CBW & 9248G4 CBW BMP040038/2004313V Safety Placard Use and Placement ISO 76028,76039 G3 CBW &...
  • Page 4 & 9248G4 BMP100025/2010203B Water AssembliEs and Schematics 76028 & 76039G3 Tunnels BMP000070/2001444V Magmeter BMP110014/2011085B Milnor Centrifugal Pump BMP930027/1998092V Steam Assemblies 76028 & 76039 G3 Tunnels BMP000037/2019416B Peristaltic Chemical Inlets 76028G3, 76039G3, 92048G4 Tunnels BMP180016/2019416A Dump Valve Installation 76032, 76028, 76039, 92048...
  • Page 5 Table of Contents, continued MPI39G3TBE/19416A Page Description Document Proximity Safeguarding for Automatic Shuttle Conveyors BISUUI01/20171205 Connecting Ancillary Equipment and Services BIPCUI02/20160113 3.1. Dimensional Drawings Dimensional Drawing - 76028G3 Tunnel 3 Module BDST28G3M3CE/2017292D Dimensional Drawing - 76028G3 Tunnel 4 Module BDST28G3M4CE/2017292D Dimensional Drawing - 76028G3 Tunnel 5 Module BDST28G3M5CE/2017292D Dimensional Drawing - 76028G3 Tunnel Options...
  • Page 7 (unless the time period is specifically extended for certain parts pursuant to a specific MILNOR published extended warranty) from our factory with no operating hour limitation. This warranty is contingent upon the equipment being installed, operated and serviced as specified in the operating manual supplied with the equipment, and operated under normal conditions by competent operators.
  • Page 8 • If the component is an electrical component, give the schematic number if known. • If the component is a motor or an electrical control, give the nameplate data from the used component. To write to the Milnor factory: Pellerin Milnor Corporation Post Office Box 400...
  • Page 9 BNUUUU02 / 2017285A BNUUUU02 0000158094 A.3 7/13/17 1:53 PM Released Trademarks BNUUUU02.R01 0000158093 A.2 7/13/17 1:11 PM Released These words are trademarks of Pellerin Milnor Corporation and other entities: Table 1 Trademarks AutoSpot™ GreenTurn™ Milnor® PulseFlow® CBW® GreenFlex™ MilMetrix® PurePulse®...
  • Page 11 Safety and Maintenance...
  • Page 12 The owner/user must familiarize himself with the contents of all machine instruction manuals. The owner/user should direct any questions about these instructions to a Milnor® dealer or the Milnor® Service department.
  • Page 13 The Safety Guide and other machine manuals must be available at all times to the appropriate personnel. See the machine service manual for safety placard part numbers. Contact the Milnor Parts department for replacement placards or manuals. Maintenance —Ensure the machine is inspected and serviced in accordance with the norms of 1.5.
  • Page 14 • Do not tamper with or disable any safety device or operate the machine with a malfunctioning safety device. Request authorized service. PELLERIN MILNOR CORPORATION...
  • Page 15 • Do not service the machine unless qualified and authorized. You must clearly understand the hazards and how to avoid them. • Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in the service instructions. Outside the USA, abide by the OSHA standard in the absence of PELLERIN MILNOR CORPORATION...
  • Page 16 • Do not enter the cylinder until it has been thoroughly purged, flushed, drained, cooled, and immobilized. • Abide by the confined space entry procedures in the reference manual. — End of BIUUUS27 — PELLERIN MILNOR CORPORATION...
  • Page 18 BMP040038/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 20 BMP040039/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 22 BMP040040/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 24 BMP040041/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 26 BMP040042/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 28 BMP040043/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 30 BMP040046/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 32 BMP040047/2004313V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 34 Paper tags on the machine provide installation guidelines and precautions. The tags can be tie-on or adhesive. You can remove tie-on tags and white, adhesive tags after installation. Yellow adhesive tags must remain on the machine. PELLERIN MILNOR CORPORATION...
  • Page 35 Read the manuals before proceeding. This symbol appears on most tags. The machine ships with safety, operator, and routine maintenance guides for customer use. Milnor dealer manuals for installing, servicing, and commissioning this machine are also available from the Milnor Parts department.
  • Page 36 A tag will also appear on the restraint to help identify it. Most, but not all shipping restraints display the color red. Some shipping restraints are also safety stands. Do not discard these. PELLERIN MILNOR CORPORATION...
  • Page 37 B2T2010018: Lift from all lifting points and use spreader bars as shown. (Used on PulseFlow machines only.) B2T2010023: Set the press frame in accordance with this instruction and the installation manual. PELLERIN MILNOR CORPORATION...
  • Page 38 Tag Guidelines for the Models Listed Below Display or Action Explanation B2T2011014: Set clips on level float rods as shown. — End of BIUUUI02 — PELLERIN MILNOR CORPORATION...
  • Page 39 The company that does these procedures must make sure that these procedures do not cause dam- age. Pellerin Milnor Corporation accepts no responsibility for chemical damage to the ma- chines it makes or to the goods in a machine.
  • Page 40 Figure 1. Incorrect Configurations That Let the Chemical Supply Go In the Machine by a Siphon Schematic Views Legend P... Pump T... Chemical tank S... The siphon occurs above here. Liquid in the gray parts of the chemical tube and tank can go in the machine. Pellerin Milnor Corporation...
  • Page 41 Prevent Damage from Chemical Supplies and Chemical Systems Figure 2. Incorrect Configurations That Let the Chemical Supply Go In the Machine by Gravity Schematic Views Legend P... Pump T... Chemical tank D... Chemical tube. Liquid in the gray areas can go in the machine. Pellerin Milnor Corporation...
  • Page 42 — There is a manifold on the machine to at- tach chemical tubes from a chemical pump system. The manifold has a source of water to flush the chemical supplies with water. Figure 3. Examples of Manifolds for Chemical Tubes. Your equipment can look different. Pellerin Milnor Corporation...
  • Page 43 — When you do maintenance on the chemical pump system: • Use the correct components. • Make sure that all connections are the correct fit. • Make sure that all connections are tight. End of document: BNUUUR02 Pellerin Milnor Corporation...
  • Page 44 These tables give the standard dimension, grade, threadlocker, and torque requirements for ® fasteners frequently used on Milnor equipment. ® Note 1: Data from the Pellerin Milnor Corporation “Bolt Torque Specification” (bolt_torque_milnor.xls/2002096). Fasteners Made of Carbon Steel 1.1. Without a Threadlocker 1.1.1.
  • Page 45 Table 3: Torque Values for Plated Fasteners with Maximum 5/16-inch Diameters and No Lubricant The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-Inches Pound-Inches Pound-Inches Pound-Inches 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 46 Specific applications sometime require that a LocTite product is applied to a bolt size outside the ranges shown here. For example, Milnor specifies LocTite 242 for use on certain 1" bolt applications and has confirmed this usage with the LocTite manufacturer. You may see variances such as this in the documentation for specific machine assemblies.
  • Page 47 Table 8: Torque Values if You Apply LocTite 262 The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-feet Pound-feet Pound-feet Pound-feet 3/4 x 10 3/4 x 16 7/8 x 9 7/8 x 14 PELLERIN MILNOR CORPORATION...
  • Page 48 1.2. Table 11: Torque Values for Stainless Steel Fasteners 5/16-inch and Smaller 18-8 Stainless with 316 Stainless 18-8 Stainless Loctite 767 Pound-Inc Pound-Inc Pound-Inc Dimension 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 49 CAUTION 3 : Malfunction Hazard—Heat, vibration, or mechanical shocks can let the fasteners loosen if you do not apply the threadlocker correctly. Loose fasteners can cause malfunctions of the equipment. • Read the threadlocker manufacturer's instructions and warnings. Obey these instructions. PELLERIN MILNOR CORPORATION...
  • Page 50 No threadlocker here Apply the threadlocker to this area Nut depth Disassembly —For high-strength threadlocker, apply heat for five minutes. Disassemble with 3.3. hand tools while the parts are hot. For low-strength and moderate-strength threadlocker, disassemble with hand tools. PELLERIN MILNOR CORPORATION...
  • Page 51 Torque Requirements for Fasteners Figure 4: Disassembly Apply Heat to a Small Area Legend How to apply heat to a small fastener How to apply heat to a large fastener — End of BIUUUM04 — PELLERIN MILNOR CORPORATION...
  • Page 53 Parts and Assemblies...
  • Page 55 Drive Assemblies...
  • Page 59 BMP000027/2008184B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Chain Tensioner Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 60 Chain Oiler BMP110071/2013102A 76032, 76028G3 & 76039G3 Tunnels, 92048G4 Tunnels (1 / 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 22,23 22,23 18,19,20,21 24,25 24,25 8 Places Typical Typical 2 Mist Head...
  • Page 61 BMP110071/2013102A (2 / 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Chain Oiler Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 65 BMP000031/2011474B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Guide Roller Assembly Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 67 BMP000036/2001225V (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Unit to Unit Drive Coupling Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 69 20HP REDUCER/10HP MOTOR ASSY FIRST & LAST MODULES A67DB002 10HP REDUCER/05HP MOTOR ASSY MIDDLE MODULES A67DB003 10HP REDUCER/06HP MOTOR ASSY 9248 -------------------------------------------------------------------COMPONENTS------------------------------------------------------------------ 54S029 MILNOR, 24.59:1 210TC 23HP 54S027 MILNOR, 24.59:1 180TC,12.5HP 27E5511D FLEX.COUP.=5018TBF COUPLING 27E5511E 1610 1 1/4" BORE BUSHING 27E5511C FLEX.COUP.-CHAIN=5018CHN 27E5511A QD-FLEX.COUP.=5018SH 1+3/8MAX.
  • Page 70 " !!$ <Q^W* 5>7 ! 1``\YS* @3< 8]bcadRcX^]bU^aAT_[PRX]V6"3aXeT2WPX]2^d_[X]Vb)ATca^UXc :Xcb:C6"B2A P]S:C6"B2A! Milnor engineers recently re-engineered the motor-to-gear reducer drive chain couplings to ensure longer life and greater reliability for these components. These new couplings can be easily retrofitted to existing G3 Continuous Batch Washers as detailed below.
  • Page 71 9^cdbeSdY_^c V_b BU`\QSY^W 7# 4bYfU 3XQY^ 3_e`\Y^Wc* BUdb_VYd ;Ydc ;D7#C3B ! Q^T ;D7#C3B " Figure 1: Sliding taper bushing on Figure 2: Aligning taper bushing motor sprocket with motor drive shaft (10 HP motor installation shown) Figure 3: Applying Loctite® to Figure 4: Securing taper bushing taper bushing set screw Figure 5: Notch motor shaft keyway...
  • Page 72 Figure 7: Tightening the motor Figure 8: Positioning the gear reducer sprocket sprocket Figure 9: Sliding motor into gear reducer Figure 10: Attaching wire wrap leader to drive chain for threading Figure 11: Starting chain into sprockets Figure 12: Feeding chain through sprockets @5<<5B9>...
  • Page 73 9^cdbeSdY_^c V_b BU`\QSY^W 7# 4bYfU 3XQY^ 3_e`\Y^Wc* BUdb_VYd ;Ydc ;D7#C3B ! Q^T ;D7#C3B " Figure 13: Double drive chain seated on sprockets Figure 14: Partially installed master link Figure 15: Installing center plates Figure 16: Center plates in position — End of BIPCLM01 — @5<<5B9>...
  • Page 74 4bYfU DbQY^ CUbfYSU 29@3<= " @eR\YcXUT 2__[ c`USc 4QdUc* " " $#  " " $#  " " % ! <Q^W* 5>7 ! 1``\YS* @3< 3aXeTCaPX]BTaeXRT This document covers two major areas of drive train service: drive chain adjustment and support roller replacement.
  • Page 75 4bYfU DbQY^ CUbfYSU 5. Measure the distance between the chain guide and the chain guide housing at the slack side of the chain (Figure 2). This span should measure 3/4" (19) - 1" (25). 6. Restore power to machine. 7. Turn the rotation switch momentarily to the position.
  • Page 76 4bYfU DbQY^ CUbfYSU 7. Recheck chain tension, then tighten the rest of the gear reducer mounting bolts. 8. Locate the Top Dead Center bolt on the large cylinder sprocket (Figure 5). This is the only cap head bolt on the sprocket and is usually installed under a target. 9.
  • Page 77 4bYfU DbQY^ CUbfYSU The support roller assemblies on every batch washer are factory set for correct alignment and weight distribution. With proper lubrication, these components should provide long service life under continuous use. The following procedure requires at least two technicians and/or suitable lifting aids (forklifts or chain hoists) to remove and install assembly.
  • Page 78 4bYfU DbQY^ CUbfYSU Figure 7: Support Wheel Tracking — End of BIPCLM02 — @5<<5B9> =9<>?B 3?B@?B1D9?>...
  • Page 81 Proximity Switch & Target Installation BMP000034/2001015V 76028 & 76039 G3 Tunnels (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Proximity Switch & Target Installation Description Item Part Number...
  • Page 82 MSSMD446AE/9637AV (1 of 3) È S ETTING ROTATION LIMIT SWITCH POSITIONS ON 76028 AND 76039 TUNNEL WASHERS Four limit switches control tunnel cylinder rotation angle and additional switches monitor the rotational align- ment of adjoining tunnel units. Slotted switch mounting brackets permit adjusting the angular position of each switch.
  • Page 83 SETTING ROTATION LIMIT SWITCH POSITIONS ON 76028 AND 76039 TUNNEL WASHERS MSSMD446AE/9637AV (2 of 3) Î F IGURE 1 (MSSMD446AE) Î S witch Locations Ë A djusting Switch Positions —Switches are mounted on slotted brackets. Move the slotted bracket on its support bracket to achieve the speci- fied switch position, as shown in FIG- URES 2 through 5.
  • Page 84 Setting Rotation Limit Switch Positions on 76028 and 76039 Tunnel Washers MSSMD446AE/9634AV (3 of 3) Î F IGURE 4 Î F IGURE 5 (MSSMD446AE) (MSSMD446AE) Î T ransfer Limit Switch Î S afety Limit Switch (RPX3) (RPX4)
  • Page 85 Load Chute and Seals...
  • Page 91 BMP000035/2011444B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Water Collectors Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 94 BMP840026/2011474B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Tension Seal Assembly Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 95 Water, Steam and Peristaltic...
  • Page 102 BMP000048/2011494B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Level Switch Installation Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 112 BMP000070/2001444V (Sheet 7 of 7) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List, cont.—Water Schematics & Assemblies Description Item Part Number Comments Used In ---------------------------------------------------------------------ASSEMBLIES------------------------------------------------------------------ A67WV004 #2 AUTO W/VERNIER&METR G3 A67WV004S #2 AUTO W/VERNIER&METR S/S G3...
  • Page 115 Comments Used In Part Number ---------------------------------------------------------------------ASSEMBLIES------------------------------------------------------------------ 27E958K74 95507D*1.5 MILNOR CENT PUMP W/O STR 27E958K98 95507# MILNOR CENT PUMP NO STR 575V 27E958K74A 95507#*1.5 MILNOR CENT PUMP W/ STRN 27E958K98A 95507#*MILNOR CENT PUMP W/STRN 600V -------------------------------------------------------------------COMPONENTS------------------------------------------------------------------ Y6 20695 92453# 1.5 CENTRI PUMP HOUSE=MACH Y6 20696 94321# 1.5 CENTR PUMP IMPELLER=MACH...
  • Page 118 1 1 2 BMP000037/2019416B (Sheet 3 of 3) Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List, cont.—Steam Assemblies Description Item Part Number Comments Used In 53A031B BODY-EL90MALE.25X1/8 #269C-42B 53A059A NUT 1/4"BR.HOLYOKE AND #61A-4 53A059B NUT + SLEV.ASSB. 5/16 PH#61P-5 87Z00EX035 TUBE=1/4"ODX.035WL 316LSS*20RM 98P505A...
  • Page 119 BMP180016/2019416A Page (1 / 2) Peristaltic Chemical Inlets 76028G3, 76039G3, 92048G4 Tunnels 23,24,25,26 (4 places) 17,18 27,28,29 20,21 20,21 4,5,6,7 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 120 NPT NIP 3/4X2.375TOE 304SS SK4 27A0626NUT CLAMP NUT 3/8-16 W/SPRING 15K096 HEXCAPSCR 3/8-16UNC2X1SS18-8 15U260 LOCKWASHER MEDIUM 3/8 SS18-8 15U245A FLTWASH 25/64IDX1.25ODX3/32 S/ 15K145D HXCAPSCR 1/2-13UNC2AX3/4 SS18- 15U310S FLATWASH-SS .53 X 1.37 .187T 15U310 LOKWASHER REGULAR 1/2 SS18-8 PELLERIN MILNOR CORPORATION...
  • Page 121 BMP000072/2018013A Page (1 / 2) Dump Valve Installation 76032, 76028, 76039, 92048 Tunnels 11,12,13 11,12,13 7,8,9 10 Places 76028, 76039, 92048 Tunnels 11,12,13 7,8,9 10 Places 11,12,13 6,7,8 10 Places 76032 Tunnels PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 122 HEXNUT 3/8-16 UNC2 SS 18-8 15K086D HXCAPSCR 3/8-16 UNC2A X 7/8" 15G206 HEXNUT 3/8-16 UNC2 SS 18-8 15U260 LOCKWASHER MEDIUM 3/8 SS18-8 60E004TE 1/4"OD X.170"ID NYL(BLK)TUBING 53A059A NUT 1/4"BR.HOLYOKE AND #61A-4 53A500 SLEEVE DELRIN 1/4"OD#60PT-4 53A501 TUBE INSERT .163"OD #63PT-4-40 PELLERIN MILNOR CORPORATION...
  • Page 134 BMP070005/2007064B (Sheet 6 of 6) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Flow Splitter Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 139 Pneumatics...
  • Page 141 Installation...
  • Page 142 ATTENTION INSTALLERS! PRESS MUST BE HIGH ENOUGH If you set the press at a low area of the floor, you may not have sufficient clearance for the tunnel. It will be necessary to reinstall the press higher Establish the System Zero Line or Z. Refer to the dimensional drawings of the various machines for required heights.
  • Page 143 BMP000078/2018224A Page (1 / 2) Tunnel Feet & Shipping Brackets 76028 & 76039G3 Tunnels Adjustable Flat Foot Shipping Brackets 9,10,11 Bolt Down Brackets PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 144 G3 SHIPPING/LIFTING PLATE 06 70016 BOLT DOWN BKT SHIPPING-RIGHT 06 70016A BOLT DOWN BKT SHIPPING-LEFT 06 70016S 7639G3 FLOOR MNT BKT SHORT S/S 06 70016C 7639G3 FLOOR MNT BKT LONG 14.6 06 70016T FLOOR MNT BKT SS 21.00 LG PELLERIN MILNOR CORPORATION...
  • Page 145 Reach into the gap where the discharge chute enters the throat of the other unit. If you feel the seal pointing outward, use a wooden stick with a smooth end to push the seal back to the correct orientation. PELLERIN MILNOR CORPORATION...
  • Page 146 It is possible to replace the inter-module seal. However, an easier alternative is to install a 6-rib seal available from the Milnor® Parts department as kit KTWDRIPR04. This seal can usually be installed in about 45 minutes. The 6-rib seal is less effective than the factory seal, but usually provides an acceptable reduction in leaking.
  • Page 147 OSHA Publication 3067 “Concepts and Techniques of Machine Safeguarding” ISO 10472-1 “Safety Requirements for Industrial Laundry Machinery” Hazards To Personnel in Proximity to Shuttle Conveyors Milnor automated laundering systems use to transport goods among automatic shuttle conveyors the processing machines in the system. Depending on model, an automatic shuttle conveyor may move in any of the following ways, in addition to running its conveyor belt(s): •...
  • Page 148 (which occasionally change) and with the plant layout. For this reason, Milnor does not provide detailed designs or materials for proximity safeguarding. If the necessary expertise does not exist within the owner/user's organization, consult appropriate sources such as local engineers or architects specializing in industrial facility design.
  • Page 149 Traversing and elevating shuttle conveyor for loose goods Bank of dryers Fence enclosing paths of both shuttles and both centrifugal extractors Gates interlocked with both shuttles and both centrifugal extractors. Fence segment between tunnels. Fence segments between dryers. PELLERIN MILNOR CORPORATION...
  • Page 150 3. Shuttle(s), press(es), and/or centrifugal extractor(s) cannot be restarted merely by closing the gate(s), but must be restarted at the machine control panel once the gate(s) are closed. Milnor shuttles, presses and centrifugal extractors provide such functionality when properly interfaced with gate interlock switches.
  • Page 151 The severity varies with chemical composition and usage, but corrosion can be rapid and severe. PELLERIN MILNOR CORPORATION...
  • Page 152 • The two units are isolated from each other to avoid harmful chemical reactions. • Ventilation fans have sufficient power to draw vapors away from the equipment. Milnor recommends 600 to 750 SCFM for the oxidation zone (300 to 375 per connection point, if two modules) and 600 to 750 SCFM for the finish zone plus the press enclosure (200 to 250 SCFM per connection point, if two modules plus the press).
  • Page 153 (up to 5 pumps), the motor for the Conlo (or Conwa) and the power for the Mentor. The Mentor power cable connects to terminals within the standard output box on the first module. Connect one side of the ground wire (in the Mentor power cable) to the ground terminal inside PELLERIN MILNOR CORPORATION...
  • Page 154 When it is impossible to provide such a ground connection, the next best is a firm connection to a metal water pipe which is known to be continuous and known to go into the earth a substantial distance. — End of BIPCUI02 — PELLERIN MILNOR CORPORATION...
  • Page 155 Dimensional Drawings...

This manual is also suitable for:

76039 g3 cbw92048 g4 cbw76028 g3 tunnel76039 g3 tunnel