ooma SmartCam User Manual page 17

Follow the instructions below to install your camera:
Find a clean spot where you would
like to connect the wall mount . Use a
pencil to mark three dots through
the screw slots .
Drill the three dots and insert the
provided anchors into the holes . Put
the wall mount against the wall and
use a screwdriver to insert the screws .
Make sure the protruding side faces
towards the camera attachment .
Put the washer on the magnetic bolt
and attach the bolt to the camera .
Attach the camera to the mount's
magnetic clip . Rotate the camera until
it is aligned in the direction you wish
to monitor .
17