37
MPEG-TS over UDP
Name: Specify an alias name for current preset task for your convenience of
■
the presets management, which will be displayed in the presets.
Type: Select the Unicast or Multicast. When unicast is selected, the data
■
source streams to the decoder. When selecting multicast, you need to
specify the multicast address to get the decoded stream.
Address: Enter the address when the Type is Multicast.
■
Port: Enter the port number specified by the streamer.
■
Buffer duration: Enter a number between 20 and 800, and the default value
■
is 60. The buffer duration is suggested to be greater than the Jitter value
shown in the Dashboard tab for a smoothy video. Shorten it when low
latency matters to your session, otherwise the default value is
recommended.
Hotkey: By default it is none. It allows you to switch decoding stream by
■
pressing the specified Hotkey on the keyboard connected to the decoder.