Heat Insulation Of Refrigerant Pipe - Sinclair ASE-150AH Service Manual


Calculate out the indoor volume [B (m

Calculate out the refrigerant density:
[A (kg)] / [B (m

Measures against crossing of the refrigerant density threshold.

In order to keep the refrigerant density below the threshold value, please install a mechanic
ventilation device. (Perform ventilation often.)

In case frequent ventilation is impossible, please install the leakage detection alarm device
linked with the mechanical ventilation device.

4. Heat Insulation of Refrigerant Pipe

In order to prevent faults caused by condensate of the refrigerant pipe and drain pipe, perform
condensate prevention and heat insulation properly. If it is forecast that high humidity and
3
)] ≤ Density threshold: 0.3kg/m
3
)] (according to the minimum volume)
3
28