Data Center Production Network - HP Moonshot 1500 Setup And Installation Manual

Moonshot iLO CM firmware SSH sessions and switch SSH sessions share connectivity through the iLO CM
management port. The iLO CM management port is located on the Moonshot 1500 CM module on the rear
of the chassis.

Data center production network

To connect the chassis to a production network, connect to any available SFP+ or QSFP+ port. The
SFP+/QSFP+ ports are located on the uplink module installed in the rear of the chassis.
•
Moonshot-6SFP Uplink Module
Cabling the HP Moonshot System 37