Table of Contents
Advertisement
Install the chassis into the J-slot on the rails, and then pull it forward.
2.
Push in the release lever, and then install the chassis into the rack.
3.
CAUTION:
Press and hold the "Push" tab on each rail until the chassis begins to slide into the
rack. Then, release the "Push" tabs and continue to slide the chassis into the rack. Press and hold
the "Push" tab on each rail again when the rails lock at a 76.2-cm (30-inch) extension. Then,
release the "Push" tabs again and finish sliding the chassis into the rack. Failure to release the
"Push" tabs may cause damage to the rails.
Installing the chassis 24
Advertisement
Table of Contents
