Westfalia SBMB 910 Instruction Manual page 7

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
 Make sure the voltage corresponds to the type label on the
unit.
 The unit is designed for operation in altitudes of up to 2000 m
above sea level.
 Before starting any work on walls, floors or similar, make sure
that all power lines in the work area are switched off at the
main switchboard. Inspect the proposed drill hole location for
any utility lines (e. g. water, gas, power) before drilling. Use a
suitable device such as a metal or electricity line detecting
device.
 Persons with limited physical, sensorial or mental abilities or
lack of know-how and/or lack of knowledge are not allowed to
use the unit, unless they are supervised for their safety by a
qualified person or are briefed by the responsible person how
to use the unit.
 Make sure the cord cannot get caught in any way. Do not wind
the cord around the unit and do not bend it.
 Please switch OFF the unit and unplug from the power supply
before cleaning, maintaining or when not in use.
 Do not jam the cord or pull cord around edges. Do not pinch
the power cord in any way and keep it away from hot surfaces.
Do not wind the cord around the unit and do not bend it.
 Do not operate the unit if it does not work correctly or has been
dropped. Do not disassemble the unit and do not try to repair it
yourself. Contact your customer support.
Safety Notes
3