Seat Cushion - Invacare Action 4 NG Series User Manual

WARNING!
Risk of overturning
– Always advise the user if you deactivate the
anti-tippers.
There is a red label on the housing of the anti-tipper,
this label shows when the anti-tipper is inactivated.
When the anti-tipper is correctly activated, the red
label will be concealed.
Setting the height
WARNING!
Risk of overturning
– The adjustments of the anti-tipper must be
carried out by a qualified technician.
This adjustment is required with reference to the
position and diameter of the rear wheel as well as
the user conditions and his particular safety limits.
Make sure that the anti-tipper device is fitted
correctly on each side (if applicable), the spring
button A and fixation C must be locked into
position.
1608637-E

3.10 Seat cushion

A suitable cushion is recommended to provide an even
pressure distribution on the seat.
CAUTION!
Risk of instability
Adding a cushion to the seat will raise your height
above the ground and can affect your stability in
all directions. If a cushion is changed it may also
change the user's stability.
– If the thickness of the cushion is changed, a
complete set up of the wheelchair need to be
done by a qualified technician.
– We recommend to use an Invacare or Matrx
cushion with anti-slip base cover in order to
prevent sliding.
Product Overview
29