Invacare Action 4 NG Series User Manual page 26

Invacare® Action 4 NG
Unhinging
1. Activate the release lever A, swing the leg rest
outwards.
2. Pull the leg rest upwards.
Hinging
1. Push the leg rest down into its receiver and swing it
forwards until it engages.
Adjusting angle
There are six preset positions available for angle adjustment.
1. Rotate the knob D with one hand while supporting the
leg rest with your other hand.
2. When a suitable angle is obtained, let go off the knob
and the leg rest will lock into the desired position.
Swinging calf pad and adjustments
26
• Swinging calf pad forwards (1) or backwards (2) :
1. Swing calf pad E forwards (1).
2. Pull up the calf pad E and swing it backwards (2).
• Adjusting height of calf pad:
1. Loosen knob C.
2. Adjust to the desired height and firmly tighten the
knob.
• Adjusting depth of calf pad
The calf pad has four depth adjustment options:
1. Remove the fixing screw F with 5 mm Allen key.
2. Adjust to one of the four positions and firmly
tighten the fixing screw F (3–5 Nm).
Adjusting foot plate
There are three different fold-up foot plates available.
1608637-E