The Control Panel - Zanussi ZDC 5465 Instruction Booklet

The control panel

On/Off button
Combination buttons "A"
In addition to selecting a programme, you can press
these two buttons to adjust the setting of the water
softener, switch off the buzzer and rinse aid dispenser.
Indicator lamps:
Shows • Wash cycle in progress
• Rinse cycle in progress
• Drying in progress
Switching the buzzer off
Before switching the buzzer off all programmes must have
been completed.
1. Press in the On/Off button.
2. Press the combination buttons simultaneously
and hold them pressed in. When the first three
programme indicator lamps starts to flash, you
can let go of the buttons.
3. Press the buzzer button once. The lamp for
the buzzer button starts to flash and the lamp
for the ended programme cycle is lit. Press the
button once more and the lamp for the ended
programme cycle goes out. Now the buzzer is off.
4. Press out the On/Off button to complete the setting.
To reset the function, follow steps 1 and 2 above
and then press the buzzer button twice, until
the end of programme lamp is illuminated again.
Water softener
button
Control lamps:
Shows that • Refilling of salt container is necessary
top lamp
middle lamp
lowest lamp
- 6 -
Indicator lamps
A
Buzzer
button
Rinse aid Programme
button
buttons
• Refilling of the rinse aid dispenser
is necessary
• The selected programme has
finished
Control lamps