Holm rNook-16 Installation Notes

INSTALLATION NOTES:
1. Caution and Safety Instructions
• Qualified personnel must install product in a
manner consistent with its intended use and in
compliance with the National Electrical Code,
Canadian Electrical Code, and/or all Local and
Provincial Codes.
• Follow all product label information and
installation instructions.
• Qualified personnel must perform all servicing of
this product.
• Turn off power at the fuse or circuit breaker
before installation or servicing.
• The use of damaged components may cause an
unsafe condition and void the product warranty.
2. Product Information
• Suitable for mounting within 1.2 M (4 ft) of the ground
• Vapor barrier must be suitable for 90°C
• For use in non-fire-rated installations only
• Not for use in environmental air-handling spaces
ARCHITECTURAL & LANDSCAPE LIGHTING
rNook-
16
• Do not block light emanating from the product in
whole or part.
• Never operate the fixture with a missing or
damaged lens. The lens must be cleaned on a
regular basis.
• The entire fixture may become extremely hot.
Do not touch the hot lens or fixture body. Do not
touch the light source at any time.
• Keep all gaskets and sealing surfaces clean
during installation and servicing; failure to do so
may lead to premature failure of the
product.
|
holmlighting.com
3YJ8
A Hunter Industries Company