Table of Contents
Advertisement
Quick Links
1. Caution and Safety Instructions
•
Qualified personnel must install and/or service
product in a manner consistent with its intended
use and in compliance with the National
Electrical Code, Canadian Electrical Code, and/
or all local and provincial codes.
•
Follow all product label information and
installation instructions.
•
Turn off power at fuse or circuit breaker before
installation or servicing.
•
The use of damaged components may cause an
unsafe condition and void product warranty.
2. Product Information
•
Suitable for mounting within 1.2 meter (4 feet) off the ground.
ARCHITECTURAL & LANDSCAPE LIGHTING
dCrest-
1/2-14 NPSM
|
holmlighting.com
13
•
Do not block light emanating from product in
whole or part.
•
Never operate the fixture with missing or
damaged lens. Clean lens on a regular basis.
•
Entire fixture may become extremely hot. Do
not touch hot lens or fixture body. Do not touch
the light source at any time.
•
Keep all O-rings and sealing surfaces clean
during installation and servicing; failure to do
this may lead to premature failure of the
product.
Tools Needed:
•
3/16" Allen wrench (installation)
•
9/64" Allen wrench (servicing)
•
#1 Phillips screwdriver (servicing)
•
#2 Philips screwdriver (servicing)
3YJ8
A Hunter Industries Company
Advertisement
Table of Contents
Related Manuals for Holm dCrest-13
Summary of Contents for Holm dCrest-13
- Page 1 dCrest- INSTALLATION NOTES: 1. Caution and Safety Instructions • Do not block light emanating from product in • Qualified personnel must install and/or service whole or part. product in a manner consistent with its intended use and in compliance with the National •...
- Page 2 dCrest- INSTALLATION NOTES: 3. Product Installation Diagrams Wiring Chart Line/Hot/Switching Black Common White Green (via stud or green lead) Ground 0-10V (-) Gray* 0-10V (+) Purple* Note: Ground Mount Allen Wrench (GM-XX) shown *For use with 0-10V driver only Black Gray Upon installation, use 3/16"...
- Page 3 dCrest- INSTALLATION NOTES: B1 FORMAT REVISION 08/27/12 4. Repair/Replacement Instructions B1 FORMAT REVISION 08/27/12 CONFIDENTIAL AND PROPRIETARY Standard Optics ( 20º, 40º and 60º) THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER. NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN.
- Page 4 dCrest- INSTALLATION NOTES: 4. Repair/Replacement Instructions (continued) B1 FORMAT REVISION 08/27/12 CONFIDENTIAL AND PROPRIETARY THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR THIS DRAWING/DOCUMENT CONTAINS TRADE SE DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER. DISCLOSURE OF THIS INFORMATION TO THIRD PA NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN.
- Page 5 dCrest- INSTALLATION NOTES: 4. Repair/Replacement Instructions (continued) CONFIDENTIAL AND PROPRIETARY THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER. NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN.
- Page 6 dCrest- INSTALLATION NOTES: 4. Repair/Replacement Instructions (continued) B1 FORMAT REVISION 08/27/12 CONFIDENTIAL AND PROPRIETARY THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR THIS DRAWING DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER. DISCLOSURE O B1 FORMAT REVISION 08/27/12 NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN.
- Page 7 Industries Incorporated (“Hunter”) warrants Holm lighting products to be free of defects in materials or workmanship under normal use for a period of five (5) years from the date of invoice. If a defect in a Holm product is discovered during the applicable warranty period, Hunter will repair or replace, at its option, the product or the defective part.
Need help?
Do you have a question about the dCrest-13 and is the answer not in the manual?
Questions and answers