Advertisement
INSTALLATION NOTES:
3. Product Installation (cont.)
FX B1 FORMAT REVISION 09/19/12
FX B1 FORMAT REVISION 09/19/12
⑩
E0000
REV
REV
ECO
Attach faceplate to housing using
included fasteners.
5. Warranty
STATEMENT OF LIMITED WARRANTY
®
Hunter
Industries Incorporated ("Hunter") warrants Holm lighting products to be free of defects in materials or workmanship
under normal use for a period of five (5) years from the date of invoice. If a defect in a Holm product is discovered during the applicable
warranty period, Hunter will repair or replace, at its option, the product or the defective part. This limited warranty does not extend to
repairs, adjustments, or replacement of Holm products or parts resulting from misuse, negligence, alteration, modification, tampering,
or improper installation and/or maintenance of the product. This warranty extends only to the original installer of the product. If a
defect arises in a Holm product or part during the warranty period, contact the local authorized manufacturer's representative. Hunter's
obligation to repair or replace its products as set forth above is the sole and exclusive warranty set forth by Hunter. There are no other
warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Hunter will not be liable to
distributor or any other party in strict liability, tort, contract, or any other manner for damages caused or claimed to be caused as a result
of any design or defect in Holm products, or for any special, incidental, consequential, or exemplary damages or any nature, including
without limitation lost business or profits. Notwithstanding the foregoing, if for any reason Hunter is found to be liable, in no event shall
Hunter's liability exceed the price of the product which gives rise to the claim, loss, or damage.
If you have any questions concerning the warranty or its application, please write to: Customer Service Department -
Holm, 1940 Diamond Street, San Marcos, CA 92078, U.S.A.
ARCHITECTURAL & LANDSCAPE LIGHTING
rNook-
UNLESS OTHERWISE SPECIFIED:
DENOTES CRITICAL INSPECTION POINTS
UNLESS OTHERWISE SPECIFIED:
DENOTES FUNCTIONALLY CRITICAL POINTS
SURFACE FINISH:
DIMENSIONAL
SCALE:
SURFACE FINISH:
DIMENSIONAL
TOLERANCES:
TOLERANCES:
N/A
.XX = ±.01
N/A
REL.
.XX = ±.01
DATE:
.XXX = ±.005
THIRD ANGLE PROJ.
.XXX = ±.005
.XXXX = ±.0005
DRAWN
THIRD ANGLE PROJ.
.XXXX = ±.0005
BY:
ANGLES:
±1°
ANGLES:
CHECKED
BY:
ALL DIMENSIONS ARE IN INCHES
E0000
AAA
7/22/2012
DESIGNER:
ALL DIMENSIONS ARE IN INCHES
AAA
7/22/2012
DO NOT SCALE DRAWING
ECO
REVISION DESCRIPTION
DRFT
DATE
APVD
PRINT
DO NOT SCALE DRAWING
REVISION DESCRIPTION
DRFT
DATE
APVD
DATE:
|
holmlighting.com
16
CONFIDENTIAL AND PROPRIETARY
CONFIDENTIAL AND PROPRIETARY
THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR
THIS DRAWING/DOCUMENT CONTAINS TRADE SECRET INFORMATION OF HUNTER INDUSTRIES, INC. USE, PUBLICATION, AND/OR
DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER.
DISCLOSURE OF THIS INFORMATION TO THIRD PARTIES ARE ALL PROHIBITED EXCEPT AS EXPRESSLY AUTHORIZED IN ADVANCE BY HUNTER.
NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN. ©COPYRIGHT HUNTER INDUSTRIES, INC.
NO PATENT LICENSE IS GRANTED TO ANY INVENTIONS DESCRIBED AND/OR ILLUSTRATED HEREIN. ©COPYRIGHT HUNTER INDUSTRIES, INC.
DENOTES CRITICAL INSPECTION POINTS
Hunter Industries
DENOTES FUNCTIONALLY CRITICAL POINTS
Hunter Industries
Engineering
Engineering
1940 Diamond St.
SCALE:
SIZE:
B
1:2
1940 Diamond St.
San Marcos, CA 92078
SIZE:
B
1:2
San Marcos, CA 92078
REL.
TITLE:
DATE:
TITLE:
NOOK, ASSEMBLY
DRAWN
NOOK, ASSEMBLY
CE
BY:
CE
±1°
CHECKED
PRODUCT:
DRAWING NO.
REV.
rNook-16
A1+
BY:
PRODUCT:
DRAWING NO.
REV.
rNook-16
21110619XXXX
A1+
DESIGNER:
MATERIAL:
21110619XXXX
MATERIAL:
N/A
N/A
PRINT
SHEET 1 OF 1
3/3/2017
DATE:
SHEET 1 OF 1
3/3/2017
Customer Service 1-844-200-4656
HL-005-IN-rNook US 3/17
5
Advertisement
