Kawai ES920 Owner's Manual page 51

2. Selecting and playing an audio file
Press the or VALUE buttons to move the selection cursor,
then press the MENU button to select the file.
The audio play screen will be shown in the display.
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP button will turn on and the
selected audio file will start to play.
* To activate the "Chain Play" mode, press and hold the PLAY/STOP
button when selecting the file. The contents of the current folder will
be played in alphabetical order after the initial file has finished playing.
 C ontrolling audio file playback
While the audio file is playing:
Press the REW or FWD buttons to rewind or advance the playing
position of the audio file. When the playing position is reset,
these button allow the file/folder to be selected.
Press the A-B LOOP button twice to set the start and end points
of the loop.
* Pressing the A-B LOOP button for a third time will turn off the loop.
Press the PLAY/STOP button to pause and resume playback.
Press the RESET button to return to the beginning of the audio
file.
 A djusting the audio file playback volume
Press the or VALUE buttons to adjust the playback volume.
* The playback volume can be adjusted within the range of 1~100.
* There may be a noticeable difference in volume between audio file
playback and the ES920 keyboard sound. When playing back MP3/
WAV audio data, please adjust the volume of the audio file as desired.
3. Exiting USB playback mode
Press the EXIT button to exit the USB Recorder.
The instrument will return to normal playing mode.
* If the selected audio file contains embedded metadata (e.g. ID3 tags)
such as artist name and song title, this information will be shown
beside the filename, on the top line of the display.
PLAY/STOP
Pause/resume
audio playback.
RESET
Reset audio to
beginning.
REW and FWD
Rewind/advance
playing position,
or select file/folder
when song is reset.
A-B LOOP
Set start/end points
of loop.
51