Equaliser - Kawai ES920 Owner's Manual

Enhancing the Sound
3. Adjusting the Amp Sim settings (drive/level/eq low/eq high)
While the Amp Sim settings menu is shown in the display:
Press the or MENU buttons to cycle through the different
Amp Sim settings pages, then press the
to adjust the value of the selected Amp Sim setting.
To exit the Amp Sim settings menu and return to normal playing
mode, press the EXIT button or wait 4 seconds.
* Amp Sim settings are independent for each sound variation.
* Any changes made to the Amp Sim type, settings, or on/off status will
remain until the power is turned off.
* Preferred Amp Sim settings can be stored to a Registration memory for
convenient recall. Please refer to page 36 for more information.
4

Equaliser

The Equaliser allows the volume of Low, Mid-low, Mid-high, and High frequency bands to be adjusted in real-time.
From the leftmost slider, volume of "Low", "Mid-low", "Mid-high",
and "High" frequencies can be adjusted.
The 4-band equalizer can be set by Tone Control. (page 74)
Tone Control offers 8 preset types and user EQ. Settings made in
Tone Control have effects on 4 sliders on the panel.
The volume range is from -6dB to +6dB; therefore, the volume
may not change even when the slider is moved in some cases
depending on the Tone Control settings.
For example, if the volume is set to +6dB in Tone Control, the
volume does not increase when the slider is moved above the
middle. Meanwhile, the volume decreases if the slider is moved
below the middle.
The volume set in Tone Control applies when the slider is at the
middle.
30
or VALUE buttons
Example: To increase the drive of the Amp Sim, press
the MENU button to select the "Amp Sim Drive"
page, then press and hold the VALUE button.