Kawai ES920 Owner's Manual page 49

4. Stopping the audio recorder, saving to USB
Press the PLAY/STOP button.
The LED indicators for the PLAY/STOP and
turn off, and recording will stop.
A confirmation message will be shown in the display, prompting
to save the recorded audio file.
Press the (REC) button to continue, or the PLAY/STOP button
to cancel the save operation.
* If cancelled, the audio recorder will return to the previous screen.
5. Naming the recorded audio file, confirming save
After pressing the (REC) button to continue the save:
The filename entry screen will be shown in the display.
Press the or VALUE buttons to cycle through the characters,
and the or MENU buttons to move the cursor.
Press the (REC) button again to save the recorded audio file
with the specified filename.
After a few seconds, the Audio Player screen will be shown in the
display, indicating that the song is ready for playback.
 O verwriting a file
If the specified filename already exists:
A confirmation message will be shown in the display, prompting
to confirm or cancel the overwrite operation.
Press the (REC) button to confirm the overwrite, or the PLAY/
STOP button to cancel.
* If cancelled, the audio recorder will return to the saving screen (step 4).
(REC) buttons will
* "Audio-000.MP3" or "Audio-000.WAV" will be used as the default name
for the recorded audio files, with the number increasing automatically.
* Saved files are limited to a maximum name length of 11 characters.
* The saved audio file will be stored in the root folder of the USB memory
device. It is not possible to store the file in a different folder.
* The audio recorder will only record sounds produced by the instrument.
Devices connected via the LINE IN jacks will not be recorded.
REC
Continue (Yes)
Move cursor.
REC
Continue (Yes)
PLAY/STOP
Cancel (No)
Select character.
PLAY/STOP
Cancel (No)
49