When The Oven Is First Installed; Before First Use - Zanussi ZYB 594 User Information

When the oven is first installed

Remove all packaging, both inside
and outside the oven, before using
the oven.
When the oven is first connected to the electrical
supply, the display will automatically show 12:00
and the symbol will flash.
Ensure the correct time of day is set before using
the oven.
To set the correct time of day:
a) while the symbol
time of day by pressing buttons "
(Fig. 1).
The time arrow symbol
5 seconds after the correct time is displayed.
b) if the symbol
press button twice.
Then, proceed as described in point a).

Before first use

The oven should be heated without food.
To do that, proceed as follows:
— press button
— press button
"Conventional Cooking" function
(Fig. 2).
— set the temperature to 250 °C using the
increasing push button " ".
— Allow the oven to run empty for
approximately 45 minutes.
— open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking"
function for approximately 5-10 minutes.
is flashing, set the correct
" or " "
will disappear about
is not flashing anymore,
to switch on the oven.
twice and select the
and "Full Grill"
electrolux 9
Fig. 1
Fig. 2
9