Troubleshooting - Haier HWM180-M1990DD Owner's Manual

Trouble-shooting
by yourself.
The machine does not
drain or drain slowly.
The display shows E1.
The machine stops running.
The display shows E2.
The machine does not
spin.The display shows E3.
The display shows E4.
The display shows FC.
The display shows FA.
Will not
wash
The machine
does not work.
Will not
spin
There are abnormal
sounds inside the machine.
The water tap leaks.
The display shows E9.
The display shows E8.
The display shows F2.
Is the drain hose blocked?
The top lid is not closed.
Has the laundry been placed
unevenly in the machine?
Is the machine level?
Is the water tap closed or
has the water supply been
interrupted?
Is the water inlet valve
blocked?
Is the water pressure too low?
Communication failure
between display board
and motor driver.
The water level sensor has
failed.
Is there a power failure?
Is the power plug inserted
tightly?
Has the water level reached
preset position?
Is the power plug inserted
tightly?
Is the top lid closed?
Is the laundry distributed
unevenly in the machine?
Is the machine level?
Has the laundry been placed
unevenly in the machine?
Are there any foreign objects
inside the bowl?
Is the water inlet hose loose?
Communication failure between
show board and power board.
Is the door lock broken?
Over flow Error
15
if the machine
Remove the blockage.
Push the Start/Pause button
once.
Close the top lid. Push the
Start/Pause button once.
Redistribute the load evenly.
Push the Start/Pause button
once.
Level the machine.
Open the water tap. Push
the Start/Pause button once.
Clean the water inlet valve
then push the Start/Pause
button once.
Use after the water pressure
is normal.
Please contact Customer Care.
Please contact Customer Care.
Wait for the power supply to
be restored.
Insert the power plug tightly.
Wait for the water to fill to the
preset level.
Insert the power plug tightly.
Close the top lid.
Redistribute the laundry.
Level the machine.
Redistribute the load evenly.
Close the top lid.
Remove the foreign object.
Fasten the inlet hose.
Please contact Customer Care.
Please contact Customer Care.
Please contact Customer Care.