ZKTeco LPRC200 User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Camera
  5. LPRC200
  6. User manual

ZKTeco LPRC200 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LPRC200
User Manual
LPRC200
Date: June 2020
Doc Version: 1.3
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
P a g e
| 1
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
User Manual

Advertisement

Table of Contents
loading

Related Manuals for ZKTeco LPRC200

Summary of Contents for ZKTeco LPRC200

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 2 Copyright © 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
  • Page 3 LPRC200 User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has, of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
  • Page 5 The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 6: Table Of Contents

    3.4.14 Firmware Upgrade ............................34 3.4.15 System Update .............................. 34 3.4.16 Auto Reboot ..............................35 3.4.17 Restore ................................36 3.4.18 Local Settings ..............................37 ................................ 38 FAQS ................................39 P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 7: Safety Precautions

    Clean the enclosure with a piece of soft cloth or a small amount of cleaning agent. • Non-professional personnel is not allowed to open the device cover. If you have any technical questions regarding usage, contact certified or experienced technical personnel. P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 8: Overview

    LPRC200 User Manual Overview About the Product The LPRC200 is a high-performance H.264/H.265-based license plate recognition camera and it has the properties of: • Integrating HD imaging • Image collection • License plate recognition • Image decompression • Storage of data on an embedded intelligent platform.

  • Page 9: Appearance

    USB connection Used to connect the power adapter. The camera's power supply voltage is 12V/3A +12V DC. Do not use other power sources to prevent damage to the camera. P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 10 Barrier switch status OPEN Audio Used to connect audio and microphone of the parking system Wiegand in WG1 IN Wiegand out WG1 OUT Auxiliary input and external button connection AUX1 BUT1 P a g e Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 11: Computer Connection Configuration

    Open the Start menu in the PC and type cmd in the search dialog box once the camera IP address is set. In the command prompt window, type Ping and camera IP address (e.g. Ping 192.168.0.18) to test the connectivity between the PC and camera. P a g e | 10 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 12 Check whether hardware connection is correct. • Check whether the TCP/IP addresses of the PC and the camera are in the same network segment. • Check whether the ping command is disabled. P a g e | 11 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 13: Camera Access Over A Web Browser

    [Download]. After the downloading completes, access WebVideoActiveXPlus.exe to install it. The security prompt may be displayed during the installation. Click [Run] to continue the installation. P a g e | 12 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 14 If default parameters are used, click [Apply] directly. If you need to modify the parameters, you can select [Next] to modify them. After changing the IP address, this wizard screen will no longer appear. P a g e | 13 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 15 Under live pictures, you can set lens debug, identify parameters and other features. P a g e | 14 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 16: Live

    2018-07-03, the snapshot time is 14:20:04, and the sub-folder named after the IP address of the device will be automatically generated locally. P a g e | 15 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 17 Virtual line to trigger recognition, Filter the background bar, Output one time for plates in same position, Output one time for same plates, Identify interval for same plate(s), Large Angel Scene and so on. P a g e | 16 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 18: File

    Streams, Video Parameters, Intelligent Analysis, Date Management, Push Configuration, P2P Configuration, 4G Configuration, Network Settings, FTP Settings, User Management, Firmware Upgrade, System Update, Auto Reboot, Restore and Local Settings. P a g e | 17 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 19: Device Information

    It is used to set the system date and time. You can choose NTP Server, Synchronize with Local Computer or Set the Time Manually. You can set as needed and click [Save]. P a g e | 18 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 20: Display Settings

    Time Format: Choose 24 hours or 12 hours. Select [Show] check box to display appropriate data on the screen. Date Format: You can choose YYYY-MM-DD, MM-DD-YYYY or DD-MM-YYYY. P a g e | 19 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 21: Streams

    • Video Stream: Mainstream has two options: "Video & Audio" and "Video". Sub stream supports only Video & Audio. P a g e | 20 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 22 Quality: You can choose the Highest, Higher, High, Bad, Worse, or Worst. When the image quality is set high, the images are clearer with better effect, and the higher the occupation of resources. P a g e | 21 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 23: Video Parameters

    18:00:00, then the camera's fill light does not work between 06:00:00 and 18:00:00, and the camera's fill light stays on from 18:00:01 to 05:59:59 of the next day. P a g e | 22 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 24 Auto: The camera dynamically adjusts the light-board brightness by obtaining the current  image brightness, exposure and gain, to achieve the optimal image accuracy with the minimum power. P a g e | 23 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 25: Intelligent Analysis

    Trigger Mode: The default is Video Trigger. Recognition Mode: The default is Multiple Frames Priority. Upload Mode: The default is Upload by SDK. Output Filter: The default is Filter vehicle far away. P a g e | 24 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 26 Car license false alarm filtering: It is set to identify non-license plate data in the lens. Select the check box to use this feature. Note: Please set it under expert guidance. System Parameters P a g e | 25 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 27 When the camera uses the SD card, this page shows the total capacity, used capacity and remaining capacity of the SD card. You can format and re-use the SD card. P a g e | 26 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 28 Record Loop Coverage: It allows the continuity of the previous access records into the new record once it becomes full. Repeated Plate Processing Interval (s): It is the processing time interval for the same license plate. P a g e | 27 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 29: Data Management

    3.4.8 Push Configuration Push protocol allows to communicate with various software platforms. In order to use this feature, the corresponding parameters need to be set here. P a g e | 28 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 30: Configuration

    Function-option: You can choose to send license plate or send license plate picture. Click [Save], after setting the parameters. 3.4.9 4G Configuration When the camera uses 4G module to communicate with PC software, the corresponding parameters should be set. P a g e | 29 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 31: P2P Configuration

    Click [Save] after setting the parameters. 3.4.10 P2P Configuration When the camera uses 4G module to communicate with PC software, the corresponding parameters should be set. P a g e | 30 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 32: Network Settings

    The time range is 2-250, and the value can be adjusted according to customer requirements. HTTP Port: Enter the corresponding port (the default port number is 80). HTTPS Port: Enter the corresponding port (the default port number is 443). P a g e | 31 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 33: Ftp Settings

    Enable: Select the check box to use this feature. Passive Mode: It is used for data transfer security. It is a default option when FTP is not selected. Server Address: Enter the FTP server address. P a g e | 32 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 34: User Management

    Username, Password may consist of a-z, 0-9, underscores, and a single dot (.), 1 to 15 characters; capitalization matters. • When the username or password is modified, it is required to log in again in order to update the change. P a g e | 33 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 35: Firmware Upgrade

    Note: Contact corresponding technical personnel for upgrade package or for remote upgrade support. 3.4.15 System Update It is used for network module program update. Click and select update file and click . After the update, restart the camera. P a g e | 34 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 36: Auto Reboot

    Auto Reboot Automatic maintenance has five modes: "Disable", "Daily", "Weekly", "Single" and "Monthly". Select any one mode, and the device will restart in accordance with the selected mode. P a g e | 35 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 37: Restore

    Restore: Restore camera parameter settings. With this function, all settings of the device can be restored to factory default values. Click , tick the parameters to be restored, and click "OK". Reboot: To restart the system. P a g e | 36 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 38: Local Settings

    Window Mode: Set the display ratio of preview window based on the four modes: "Full", "4:3", "16:9" and "original". Preview Capture/Video: Set the storage path of capture/video in the camera. P a g e | 37 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 39: Log

    It is used to search the recording history. You can filter the search list with options such as search type, start time, end time, and the number of log results per page. After selecting the possibilities, click [Search] to view the outcomes of the log. P a g e | 38 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.

  • Page 40: Faqs

    Log in the camera with the browser, click [Setup] -- [Intelligent Analysis], click the question mark in the upper right corner of the interface to query the version information. P a g e | 39 Copyright©2020 ZKTECO. CO., LTD. All rights reserved.
  • Page 41 ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 – 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.

Table of Contents