ZKTeco 8000 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Camera
  5. 8000 Series
  6. Quick start manual

ZKTeco 8000 Series Quick Start Manual

Hide thumbs Also See for 8000 Series:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Quick Start Guide
8000 Series IP Camera
Version: 1.0
Date: December 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZKTeco 8000 Series

Summary of Contents for ZKTeco 8000 Series

  • Page 1 Quick Start Guide 8000 Series IP Camera Version: 1.0 Date: December 2018...
  • Page 2 Precautions These instructions are intended to ensure proper operations to prevent danger, damage or loss of property. Please read this document carefully before using the product and keep this operation guide for future reference. As shown below, the preventive measures are divided into “Warning” and “Caution”. Warning: may lead to death or serious injury if proper precautions are not taken.
  • Page 3 Caution Before running the camera, please make sure whether the supply power is right.  Please do not drop or damage the product.  Do not touch the optical component of the image sensor. You may wipe the dust with a clean ...
  • Page 4 1 Product Introduction 1.1 Product Features IP Camera is an embedded digital surveillance product that integrates the traditional analog camera and network video server. It uses an embedded operating system and a high-performance processing platform, highly efficient system scheduling and its code is curing in Flash. It’s small-sized with high stability and reliability.
  • Page 5 Names Descriptions Body The body of the IP camera Hex screw Adjust the 3 Dimension Base The bottom part of the camera Lens Lens Network cable RJ45 connector, PoE Power cable DC 12V...
  • Page 6 2 Installation Please make sure the equipment and components are intact before installation. There are typically two installation methods for IP cameras of this series: mount on the wall or mount to a ceiling. Below is the installation steps to mount a camera on a wall and to a ceiling. 2.1 Camera Installation Caution: the wall on which the device is going to be mounted should be with a certain thickness and is at least three times heavier than the camera.
  • Page 7 3 Quick Operations 3.1 Network Connection Make sure the camera is connected to the network properly. Please also check the state of the local network of the PC. If the state shows the icon, the network connection is failed. The initial default IP address of the camera is 192.168.1.86. Please set the IP address, subnet mask and gateway for your computer.
  • Page 8 Please enter the camera’s IP address in the address bar and click on “Enter”（The default IP address is “192.168.1.86”）, then the system will show you the login interface. Then, input your camera’s “User Name” (Default: admin), “Password” (Default: 123456) and click on “Login”. Caution: Detailed functions and configuration of IE Active and the client software, please refer to the user manual of the IP camera from our official website.

Table of Contents